The formulas
Everything starts from the stitch count in your design file.
1. Top thread per hat
stitches ÷ 1,000 × 5 m × (1 + waste %)
2. Bobbin thread per hat
stitches ÷ 1,000 × 3 m × (1 + waste %)
3. Thread cost per hat
top m × (cone price ÷ cone m) + bobbin m × (bobbin price ÷ bobbin m)
4. Hats left on a cone
meters left on the cone ÷ (top m per hat × that color's share)
5. Reorder point for blanks
hats a week × (days to arrive + 3 days) ÷ 7
Worked example: a 24-hat order
An 8,000-stitch, 3-color logo on Richardson 112 trucker hats. The main color is 60% of the stitches. Thread is a 5,000 m cone at $17.99; bobbin thread is an example $12 per 5,000 m.
The whole order uses $5.32 of thread and $234.00 of hats. The main cone has room for 75 hats, so thread isn't the problem. The blanks are: after this job there are only 6 left, well under the 18 you'd use while a new box ships. Order blanks before you start stitching.
Mistakes that stop a job halfway
- Checking the thread total, not each color. Ten full cones don't help if the one color in every logo is nearly empty.
- Forgetting bobbin thread. Bobbins run out quietly. Keep a box ahead, especially on big orders.
- Trusting the stitch count alone. Puff foam, dense fills and lots of trims use more. Raise the waste percent for those designs.
- No spare blanks. Plan a hat or two for a bad hoop or a thread break on the first run.
- Buying blanks one order at a time. If blanks take a week to arrive, a rush order you can't start costs more than a few spare hats on the shelf.
Keep it current in 10 minutes a week
- Save the stitch count and color list for each design you stitch often.
- List your cones by color, with about how much is left on each.
- Count hat blanks by style and color.
- Before each order, check the main color and the blanks you need.
- Reorder anything that will be under its reorder point after the order.
Craft Stock Studio
Let Craft Stock Studio keep the count for you
Add your thread cones, backing and hat blanks once. When you make hats in Studio, it takes the blanks and supplies out of stock, warns you if you don't have enough for an order, and flags anything that's under its reorder level.
Then $29/month or $290/year if you keep it.
Ready to set your price?
Thread and blanks are the supply side. For what to charge per stitch, per hat, or for digitizing a logo, Craft Calculators has guides for that.
Questions makers ask
How much thread does an embroidery design use?
A common rule from Madeira is about 5 meters of top thread and 3 meters of bobbin thread for every 1,000 stitches. An 8,000-stitch hat logo uses about 40 meters of top thread and 24 meters of bobbin before waste. Dense fills and satin columns use a little more, and a lot of short jumps add trims.
How much does the thread cost on an embroidered hat?
Usually pennies. At about $18 for a 5,000 meter cone, top thread is about a third of a cent per meter, so an 8,000-stitch design is around 16 cents of top thread and 22 cents with bobbin. The hat blank costs about 40 times more than the thread.
How many hats can I get from one cone of thread?
Divide the cone length by the thread one hat uses. A 5,000 meter cone at 44 meters per hat (8,000 stitches plus 10% waste) is about 113 hats if the whole design were one color. With several colors, the main color runs out first, so do the math for that cone.
When should I reorder hat blanks?
Reorder when the blanks left will only last until the new box arrives, plus a few days. At 15 hats a week and 5 days for shipping, with a 3-day cushion, that's about 18 hats. Check it after every big order, not just at the end of the week.
Does stitch count tell me how long the thread lasts?
It's the best number you have. Your machine and digitizing software show the stitch count for each design. Multiply it out per color, and you'll know which cone will run dry before the job starts instead of halfway through a hat.
Is this the same as an embroidery pricing calculator?
No. This guide covers thread usage, supply cost and reorder timing. For what to charge per stitch, per hat or for digitizing, use the embroidery pricing guide on Craft Calculators linked on this page.
Thread rule from the Madeira stitch density guide. Cone prices checked in November 2026 for 5,000 m Isacord cones at Hayes Country Quilts, and the Richardson 112 at Blankstyle (its listed price on orders over $100). The bobbin price is an example. Use your own supplier prices in the calculator.
